Huis
Producten
Krah Pipe
200mm To 3000mm HDPE Structured Wall Pipe PN16 Structured Wall Plastic Pipes

200mm To 3000mm HDPE Structured Wall Pipe PN16 Structured Wall Plastic Pipes

Plaats van herkomst:CHINA
Merknaam:xinsen
Minimale bestelhoeveelheid:Bespreekbaar
Standaard verpakking:Standaard verpakking
Levertijd:7-15 werkdagen
Betalingsvoorwaarden:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Specificaties
Markeren:

3000mm HDPE Structured Wall Pipe

,

200mm HDPE Structured Wall Pipe

,

PN16 Structured Wall Plastic Pipes
Diameter range:
200 mm tot 3000 mm
Wall thickness:
5 mm tot 50 mm
Pressure rating:
Tot PN16
Temperature resistance:
-40°C tot +60°C
Joint type:
Stompfusie, elektrofusie of mechanische verbindingen
Inner wall thickness:
1.5mm tot 5.0mm
Productomschrijving
HDPE Structured Wall Pipe (Type B) Hot-state Spiral Winding Process
Product Introduction

Polyethylene (PE) Spiral Structured Wall Pipe (Type B) is a premium flexible piping system manufactured from high-density polyethylene (HDPE) raw materials. The pipe is fabricated using an advanced hot-state spiral winding process and sequentially cooled via an engineered rolling-air cooling method prior to demolding.

Structurally, it features an ultra-smooth interior surface complemented by a spirally wound, profiled reinforcing rib on the exterior, all integrated into a unified structure through continuous helical winding.

HDPE Spiral Wound Reinforced Pipes utilize an integrated socket-and-spigot electrofusion jointing mechanism. During production, the two ends of the pipe are precision-profiled into a socket (bell) and a spigot, with high-efficiency electrical-resistance fusion wires permanently embedded into the socket end.

On-site jointing is exceptionally straightforward—requiring only a standard power source connectivity to complete a homogeneous fusion weld at a molecular level, resulting in a 100% leak-free pipeline network.

This product is widely deployed in municipal drainage and sewerage, electrical ducting, petrochemical networks, coal mine ventilation, and other demanding infrastructure sectors. Serving as an ideal substitute for traditional reinforced concrete and cast iron pipes, it represents a rapidly advancing innovation in underground buried drainage and has been officially designated as a Top-Priority Promoted Product by the Ministry of Housing and Urban-Rural Development.

Common Alias: Krah Pipe

Type B Structured Wall Pipe Construction

The pipe is manufactured by spiral winding on a preheated integral steel drum mold. The finished pipe has a smooth and even inner surface, while the outer surface features spiral "O"-shaped ribs. Inside the "O"-shaped ribs, hollow supporting tubes made of polyolefin materials (generally polypropylene) shall be embedded as auxiliary supports.

The socket and spigot connection of the pipe shall be formed in one continuous winding process and shall not be secondarily welded.

  • di — Inner diameter
  • ec — Structural height
  • e4 — Inner wall thickness
  • 1 — "O"-shaped auxiliary supporting hollow tube

Note: The hollow tubes within the e4 section may consist of multiple layers.

a) Type B Structured Wall Pipe
b) Type B Structured Wall Pipe with Embedded "O"-Shaped Auxiliary Supporting Hollow Tubes in the Inner Wall
Technical Specifications
Nominal Diameter (DN/ID) Minimum Average Inner Diameter Minimum Inner Layer Wall Thickness Minimum Socket Wall Thickness Minimum Spigot Wall Thickness
200 195 1.5 5.3 5.9
300 294 2.0 8.0 8.9
400 392 2.5 10.7 11.9
500 490 3.0 13.4 14.9
600 588 3.5 13.7 15.2
700 673 4.0 13.7 15.2
800 785 4.5 13.7 15.2
900 885 5.0 13.7 15.2
1000 985 5.0 13.7 15.2
1100 1085 5.0 13.7 15.2
1200 1185 5.0 13.7 15.2
1300 1285 5.0 13.7 15.2
1400 1385 5.0 13.7 15.2
1500 1485 5.0 13.7 15.2
1600 1585 5.0 13.7 15.2
1700 1685 5.0 13.7 15.2
1800 1785 5.0 13.7 15.2
2000 1985 5.0 13.7 15.2
Contacteer ons
U kunt ons op elk moment contacteren!